------------------------------------------------------- 脉冲涡流检测仪 脉冲涡流探伤仪 金属裂纹识别检测仪 应力集中检测仪 磁记忆检测仪 手持式 NDT检测仪 应力集中磁检测仪
金属磁记忆检测仪 磁记忆检测
应力应变检测仪 应力应变检测系统 电磁涡流 金属应力集中磁检测仪
PRINCIPLE:
Metal defect diagnosis module is based on the principle of micro-electronics technology, eddy current detection of the source field, as well as modern application of the principle of study developed by the General Principle - non-destructive testing module. The Detect module A significant feature is: lightweight and flexible, independent and easy to use, either with the existing terminals (such as: PC machine, ray, ultrasound and other host of in-service nondestructive testing instruments) supporting the use of combination can also be both set to conduct an independent job, so that the completion of the nondestructive testing of metal parts job, but also save a lot of equipment input costs.
Metal defect diagnosis module is mainly used in: on-line detection of major components of equipment, equipment, regular maintenance, the main components such as diagnostic analysis; to adapt to the railway bridge, aerospace, industrial manufacturing, boating, petrochemical and coal mining areas such as non-destructive testing. Similar functionality beyond the existing instrumentation, but is low-price.
Main Features and Specifications
- Detected frequency: 5Hz ~ 2001Hz (single-step continuous); 5Hz
~ 10001Hz (continuous)
- max Location: 3mm (with the related maximum 20mm ~ 50mm)
- Gain: Automatic adaptation
- sensitivity: 0.1 mm/0.2mm (can be adapted to a wide
range of detection of the probe), on the
smooth surface (roughness less than 10um)
can be detected in longitudinal 50um long
crack, crack the width of the more narrow,
higher sensitivity.
- Interface: Standard RS232, can be parameter settings,
after-class graphics processing, network
management .
- Working mode: independent mode 1, the integrated use of
Mode 2.
- show: Guangzhu manner, waveform mode .
- storage: No2 model can store 100 pieces of graphics
Detect and deal with after-class software.
|